Metallpresse PLATARG 712

Press Designdrive system: eccentric / crankopenings in uprights: nonumber of slide actions: 7 table cushion: noquick die change system: noPress forcestotal force (nominal): 60toSlidestroke: 150mmstroke rate (max.): 200/minslide (mechan. Press)slide adjustment: 5mmstroke rate (min.): 70/minstroke rate (max.): 200/minTool Assembly Dimensionsshut height (stroke down, adjustment up), BDC: 127mmDecoilerdesign: twin reelsheet width (min): 90mmStrip-Feederfeeder type: roll feederElectrical specificationstotal power consumption: 18.5kWmains voltage: 415Vmains frequency: 50HzDimensions / weightsspace requirements -left/right-: 4000mmspace requirements -front/back-: 2000mmtotal height: 3000mmtotal weight approx.: 8000kgAttachments (presses)2-hand engagement: yesnoise protection cabin: yesacc. to actual accident protection regulation: yesTechnical details of the machine below:

- Stations 12

- Station distance 82.55 mm

- max. strip width 90 mm

- max. strip thickness 1.63 mm

- max. blank diameter 52 mm (standard) 44 mm (zig-zag)

- min. blank diameter 20 mm

- max. amount of multiple segments 2

- max. pull height 25 mm

- max. pull stamp diameter 32.5 mm

- Stroke 150 mm

Currently Press not in operation,

can be shown in idle running condition

Documentation available; 2-fold operating instructions and mech.1 for the control unit

Horizontal transfer mech cam cam-controlled;

Belt feed ZIG ZAG mech cam cam-controlled;

Ejector mech cam cam-controlled, pull-back with springs;

Operation manual available

Double Decoiler

Type BRH4

Load Capacity 300 kg

Stripwidth 300 mm

YOM 1983

Electrical specifications - total power consumption: 18.5 kW

Controls: SIEMENS SIMATIC