Leie Caterpillar Medium wheel loaders 950 GC 151 kW 2.5-4.4 m³（3.3-5.75 yd³） 18676 kg 【ACHIEVE】 TOP CONDITION!!!

Publisert: 1mån. 2dg.

Publisert: 1mån. 2dg.

Beregne lease betalinger

Innledende gebyr

10%

20%

30%

40%

50%

Vilkår for leasing, måneder

Estimert leasing rente: 10%

10%

15%

≈172 217EUR/mnd*

Opprinnelige prisen 172 217 EUR

* Omtrentlig beregning.

Merke

CATERPILLAR

Modell

Medium wheel loaders 950 GC 151 kW 2.5-4.4 m³（3.3-5.75 yd³） 18676 kg 【ACHIEVE】 TOP CONDITION!!!

Referansenummer

QFCAT088

Produksjonsår

2024

Driftsvekt

18676 kg

Topphastigheten

34 km/t

Hydraulikk

Sted

China, China, 410003, Changsha, Room 513, Block 4, Shangming Commercial Center, No. 28, Fuyuan Rd(M), Kaifu District

Motor/transmisjon

effekt

202 hk

motor

Cat C7.1, displacement 7.01 l, Maximum Gross Torque - 1400 rpm 1020 N·m, Rated Gross Power - 2200 rpm - ISO 14396 168 kW, Maximum Gross Power - 2000 rpm - ISO 14396 171 kW, Maximum Net Torque - 1300 rpm 931 N·m

girkasse

manuell

transmisjon

manual

Shassis/fjæring

forhjul

Options include: 23.5-25 16PR, L3 (Triangle)

Førerhuset/interiøret

førerhustype

dagførerhus

Annet

antall tilgjengelige enheter

Utstyr

utstyr

skuffe

Mer informasjon

Medium wheel loaders

950 GC

Main technical specifications

Net Power - ISO 9249

151 kW

Operating weight

18676 kg

Bucket capacity

2.5-4.4 m³（3.3-5.75 yd³）

Engine

Net Power - ISO 9249 151 kW

cylinder diameter 105 mm

stroke 135 mm

engine

Engine model Cat C7.1

displacement 7.01 l

Maximum Gross Torque - 1400 rpm 1020 N·m

Rated Net Power - 2200 rpm - ISO 9249 151 kW

Rated Gross Power - 2200 rpm - ISO 14396 168 kW

Maximum Gross Power - 2000 rpm - ISO 14396 171 kW

Maximum Net Torque - 1300 rpm 931 N·m

weight

Operating weight 18676 kg

bucket

Bucket capacity 2.5-4.4 m³（3.3-5.75 yd³）

Operating specifications

digging force 147 kN

Note (1) Conforms to ISO (2007) 14397-1 parts 1 to 5.

Static Tipping Load - 40° Full Turn - Rigid Tires 11197 kg

Static Tipping Load - 40° Full Turn - ISO 14397-1* 10503 kg

Note (2) *Fully compliant with ISO (2007) 14397-1 Parts 1 to 6, which requires a 2% maximum error between calculated and tested results.

gearbox

Forward - 1st 7 km/h

Forward - 2nd 12.5 km/h

Forward - 3rd 22 km/h

Forward - 4th 34 km/h

Reverse - 1st gear 7 km/h

Reverse - 2nd 12.5 km/h

Reverse - 3rd 22 km/h

hydraulic system

Steering System - Pump Type piston

Hydraulic Cycle Time - Dump at Maximum Lift 1.2 s

Hydraulic Cycle Time – Total Cycle Time 10.1 s

Hydraulic Cycle Time – Lower, No Load and Float Lower 2.8 s

Hydraulic Cycle Time - Lift from Carry Position 6.1 s

Implement System - Optional 3rd Function Maximum Flow 280 l/min

Implement System - Maximum Pump Displacement at 2200 rpm 248 l/min

Implement System Pump Type piston

Implement System - Maximum Operating Pressure at 50 ± 1.5 L/min (13.2 + 0.4 gal/min) 27900 kPa

Implement System – Optional 3rd Function Maximum Pressure at 70 L/min 20680 kPa

brakes

brakes Brakes comply with ISO 3450

tire

choose Options include: 23.5-25 16PR, L3 (Triangle); 23.5R25, L3 (Triangle); 23.5R25, L3 (Bridgestone)

Cab

ROPS/FOPS ROPS/FOPS complies with ISO 3471 and ISO 3449 Class II standards

Maintenance refill capacity

Differential - Final Drive - Front 40 l

crankcase 20 l

Fuel tank size 290 l

Differential - Final Drive - Rear 38 l

gearbox 45 l

Hydraulic oil tank 120 l

Cooling system 48 l

size

B-pin height 4188 mm

B-Pin Height - Carry Position 655 mm

Lift arm clearance 3649 mm

Rear axle centerline to counterweight edge 2001 mm

Height - Top of ROPS 3458 mm

Height - Top of Exhaust Pipe 3596 mm

Height - Top of Hood 2568 mm

wheelbase 3300 mm

Rear axle centerline to hitch 1650 mm

Bucket tilt angle - maximum lift 60°

Dump angle at maximum lift position 52°

Rack Angle - Carrying 45°

Backward Angle - Ground Position 40 °

Height - Axle Centerline 750 mm

Be om et tilbud om leasing

FirmaPrivatperson

Firmanavn *

MVA-nummer / Firmanummer *

Grunnleggende år *

Ditt land *

Din e-postadresse *

Ditt telefonnummer med landskode *

Denne forhandleren aksepterer kun leasingforespørsler fra Tyskland. Så skriv inn et tysk telefonnummer. Det er ikke mulig å legge inn et nummer registrert i et annet land.

Beskjed - optional

The administrator of personal data submitted in the above form is AMARON FZCO, Registration Number DSO-FZCO-40745, with its registered office at 42902 - 001, IFZA Business Park, DDP, Dubai, UAE. E-mail contact: info@truck1.eu.
Personal data are processed for the purpose of handling the inquiry submitted via the form. Depending on the user’s location, the processing of data is carried out in accordance with:
• Article 6(1)(f) of the GDPR – for users located in the European Economic Area (EEA), where processing is based on our legitimate interest in responding to inquiries;
• Applicable data protection laws of the United Arab Emirates or other relevant jurisdictions – for users outside the EEA.
Each user has the right to request access to their personal data, rectification, erasure (where justified), restriction of processing, and objection to processing. Users in the EEA also have the right to lodge a complaint with the competent supervisory authority. More information on how we process personal data can be found in our Privacy Policy available on the website.

Beregne lease betalinger

Innledende gebyr

10%

20%

30%

40%

50%

Vilkår for leasing, måneder

Estimert leasing rente: 10%

10%

15%

≈172 217EUR/mnd*