Ny Lavloader tilhenger for transport av tunge maskiner EMTECH New

5 axle EMTECH lowloader trailer with drawbar and turntable (2+3) + hydraulic ramps

Total length (without drawbar and ramps): 13.132 mm

Drawbar lenght (L): 2.500 mm

Total length with drawbar (2.500 mm without ramps): 15.632 mm

Wheelbase: 5.445 mm

Rear overhang: 2.895 mm

Coupling height (X - by choice): ……… mm

Height of the loading platform (tyres 245/70 R 17,5’’): 1.024 mm

Total width: 2.550 mm

Total width after extention: 3.000 mm

Axle distance: 1.310 / 1.360 mm

Comments / particulars:

• Weights

Administral / Technical

Speed:--- / 105 km/h

Total weight (GVW):42 000 / 55 000 kg

Empty (Tara) weight (excl. options) c.a.:12 000 / 12 000 kg (+/- 3%)

Payload c.a. (+/- 3%):30 000/ 43 000 kg

• Depends on country of import and local regulations
• Chassis

- Chassis construction: high specified quality construction steel

- 5 pieces SAF axles 17,5’’ with technical payload 11 tons each

- Airsuspension

- Drum brakes

- Third axle manually lifted

• Tyres and wheels

- 20 pieces of tires and wheels 245/70 R17.5 - brand Continental

- Wheels made out of steel, color in silver-grey

• Brakingsystem WABCO 4S/3M

- Pneumatic Drumbrakes

- Pneumatic, load-dependent brake system (ALB)

- Automatic regulation of brake slack adjuster on the axles (AGS)

- Automatic Parking-/handbrake with

- 2 units of raise and lower valve in the airsuspension system (one on turntable, second on back axles)

• Lightning system Full Led Instalation (ERMAX – Scandinavian type)

- Lightning system in accordance to RL 76 / 756 / EWG regulations

- Front markerlights (white) – 2 pcs

- Side markerlights (Orange)

- Back 2 pcs of widening markerlights (LED) on extendible bracket and inclusive plug-sockets

- License plate lights in the rear bumper (white) – 2 pcs

- Back lights (LED) – 2 pcs

- Connection with a 2x7-pin socket mounted on the front

• Paint treatment

- Chassis and steel parts are completely shot-blasted and then cleaned from dust

- Secondly the chassis and steel parts are threatened with an special anti-corrosion.

- Subsequently an primer is applied

- Finishing with coating

- Color chassis and attachments in 1 color..... (exclusive from the standard RAL-pallet) by choice

• Other equipment

- Turntable

- Drawbar with tension

- Drawbar eye Ø 50

- Bin for spare wheel

- Widening of the lowbed till 3,0 meters with extendible steel outriggers (galvanized)

- Widening plates with marker lights

- Set of galvanized electro-hydraulic steel drive-on ramps 800 mm width, 2-sections, Hydraulic raise-/lowarable. Floor in hardwood and steel checkerplate. Hydraulic ramps for total width with special watherproof HEKSA playwood 2 x 21 mm (42 mm) thickness . Secured with straps (e.g. photo bellow).

• Additional options and accessories (Included)

- At the front, derived die lubrication kalamitek on a turntable (e.g. photo)

- Toolbox on left side (e.g. photo)

THIS COMMERCIAL OFFER IS A NEGOTIATION INVITATION AND DOES NOT CONSTITUTE A COMMERCIAL OFFER IN THE CIVIL CODE CITIZATION. OFFER IS 30 DAYS VALID FROM THE DATE OF OFFER.

For more information You could conatct with me at any time. It will be a plessure to be at Your service.

Tel / Mob : + 48 604 447 605 (EXPORT SALES)

Export e-mail: show contacts